128 X 64 Dot Matrix LCD Display, White on Blue


128 X 64 Dot Matrix LCD Display, White on Blue
Stock Number: 34348 OP
 Review Average:  
 Number of Reviews: 3
 View ReviewsReview this item
$9.95


Availibilty: In Stock   Units: 22
Quantity 



SHARE
    
     Email this to a friend     

Detailed Description

128X64 Dot Matrix LCD Graphic Display using the ST7920 Controller Chip:
White Characters on Blue
The module can display mixed letters, numbers, Chinese fonts and graphics. Can also display 8 × 4 (16 × 16 dot matrix) Chinese characters.
Three control interfaces: 8-bit or 4-Bit microprocessor interface and serial interface.
Power: 5VDC @ <10mA Backlight Power: 5VDC @ <80mA
Dot Size: 0.48 X0.48mm Dot Pitch: 0.52 X0.52mm
Display Area: 73 X 39mm
64 × 16-bit display RAM (DDRAM)
Supports 16 words x 4 lines (Max)
LCD display range 16 words x 2 lines
64 x 256-bit Graphic Display RAM (GDRAM)
2M-bits Character Generation ROM (CGROM)
Support 8192 Chinese words (16x16 dot matrix)
16K-bit half-width Character Generation ROM (HCGROM)
Supports 126 characters (16x8 dot matrix)
Multi-function instructions: Display clear, Return home, Display on / off, Cursor on / off, Display character blink, Cursor shift, Display shift, vertical line scroll, reverse display, Cursor shift, Display shift, Vertical line scroll, & Reverse display.
Operating temperature -20 ~ +70 C
W: 3-11/16" H: 2-3/4" T: 1/2" WT: .2

View PDF Data Sheet
Basic DATA


View PDF Data Sheet
Display DATA





California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
Verified Purchase
Good buyer, prompt payment, valued customer, highly recommended.
eBay
 
COOL Graphic Display
Worked fine for me but remember to hook it up correctly and when using with our Arduino you have to make sure you have the correct libraries installed, which are not by default.
- s m, GA
 
Worked great until...
Worked great until it didnt. I used this for a display on an Arduino based AC power monitor- ran about 30 hours continuously, then died. I will probably try another as I dont want to redo all of the code- just hope the next one is more reliable.
- Donald, VA