Auto/Manual PWM Speed Control for 3 Fans


Auto/Manual PWM Speed Control for 3 Fans
Stock Number: 35801 MI
  Be the first to review this item
$5.95

Did we sell out of a part you need?
You may be able to purchase it directly from our overseas supplier.

Please note the following restrictions:
   •   $50 minimum per line item
   •   $100 minimum per order

To inquire, contact:

Supplier: Aqua Jiang
Email: aquajiang1@outlook.com

When emailing, please use “MPJA Customer” as the subject line and include the MPJA stock number and quantity needed. The supplier will respond with pricing, lead time and shipping costs.



SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet
DATA SHEET


3 Channel Fan control board supports most 12V 4 wire fans.
Stall alarm on Channel 1 & 2
Power: 12VDC
Current: 5Amax /Channel, 9A total 3 fans
Channel 1: Auto control
Output range: 20 to 100%, or 40 to100% Selectable
Temperature Set Switch Select:
35°C min 45°Cmax
40°Cmin 55°Cmax
50°Cmin 70°Cmax
60°Cmin 90°Cmax
When the temperature is below the set temperature, Output is at the minimum speed; when it exceeds the min. temperature setting the fan will accelerate until max. temperature is reached.
Above max. temp. Fan is at full speed.
Channels 2 & 3: Manual Set
Output Range: 10 to100% Manual adj.
Note: Rangs are only relative; the actual control effect will vary depending on the fan.
Fan Stall detect on Outputs 1- 2 or both
Minimum stall warning speed: 700-800 rpm
Temperature sensor: 50 Kohm #3950
Sensor Error: <5%
Connections: Terminal Strip Power
3x4pin male header 0.1" pitch, Fans
2x2pin male header 0.1" pitch, Temp Sensor & Alarm Buzzer
L: 2" W: 1-11/16" H: 1/2" WT: .03


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov