|
|
| |||||||||||
|
|
|
| ||||||
 |
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example: ABS plastic contains styrene PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP) electrolytic capacitors can contain Ethylene glycol Brass can contain Lead flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA) Aluminum alloys can contain Chromium To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching! |
Product Reviews Click here to review this item | ||
| ||
 |
Works great | |
| This is my first hot air rework station. Been using to remove parts as part of a modification where I was using the tweezer type soldering iron before. I thought it burned out after using the first time because the air just turned off a little while after turning off the Heater. Turns out the unit goes through a 55 second air cooling cycle then shuts down completely until I turn ON the heater again. | ||
| - Louie, CA | ||
 |
It turns off completely after a minute | |
| Those who say it wont turn off need to be patient. When first plugged in and when switched off the air pump runs on to cool the gun. Then it goes off. If your doesnt it is defective. | ||
 |
Good value but..... | |
| Honestly, it does everything I hoped it would, plus one thing more. You cant shut it off! Can only turn off the heat, not the pump! Yes, Ill add a separate switch but..... | ||
| TX | ||
|
Works like a champ. | |
| I have used my Hot Air station from MPJA for quite a few years now and it will just not stop working. I am very impressed, you have to make sure you turn it off, of course, I have seen one kill its self. I use mine to do SMT, TH and BGAs at my desk, it is great to be able to perform that kind of work without needing the most expensive machines. | ||
| - Chad Daugherty, TX | ||
|
Awesome little machine for the money | |
| Ive had this unit for about 2 weeks. I have all ready removed a 48pin QFP ST Micro and used it to heat shrink. It works great! The fan starts running as soon as you plug it in and the on/off switch only controls the heat. But, another switch could easily be added. But, for the price, you just cant beat it! | ||
| - Mike Partain, SC | ||
|
Seems to work pretty well! | |
| Ive used this only a dozen or so, but it has worked great those few times. Temp/airflow adjustments seem to work fine. This is one of those tools you dont use very often but is worth its weight in gold when you have to remove a connector or chip. | ||
