USB to RS485 bidirectional half-duplex PL 2303 CHIP


USB to RS485 bidirectional half-duplex PL 2303 CHIP
Images/36121-large.jpg Images/36121-1.jpg   California Proposition 65 Warning
Stock Number: 36121 PL
  Be the first to review this item
$5.95
$2.95 
This item is discontinued & is not being restocked.


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.

SHARE
    
     Email this to a friend     

Detailed Description

WE DO NOT HAVE ANY INFORMATION ON USE
The PL-2303HX is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HX provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host.
Helpful WEB Info, and drivers
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41
https://prolificusa.com/product/pl2303hx-rev-d-usb-serial-uart-bridge-controller/
Data Sheet: https://prolificusa.com/app/uploads/2018/02/ds_pl2303HXD_v1.6.0.pdf
The PL-2303HX is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HX provides a convenient solution for connecting an RS-232 like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-2303HX highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. The PL-2303HX is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode, the PL-2303HX is perfect for bus powered operation with plenty of power left for the attached devices. Flexible signal level requirement on the RS-232 like serial port side also allows the PL-2303HX to connect directly to 5V, 3.3V, or 2.5V devices.
On chip USB 1.1 transceiver, 5V®3.3V regulator, and 12 MHz crystal oscillator
Support RS-232 like serial interface
Full-duplex transmitter and receiver (TXD and RXD)
Six MODEM control pins (RTS, CTS, DTR, DSR, DCD, and RI)
Parity error, frame error, and serial break detection
Programmable baud rate from 75 bps to 6,000,000 bps
Extensive flow control mechanism
Adjustable high/low watermark level
Automatic flow control with CTS/RTS/ XON/XOFF
Configurable 256-byte outbound buffer and 256-byte inbound buffer or 128-byte outbound buffer and 384-byte inbound buffer
Support remote wake-up from MODEM input signals
Two general purpose I/O (GPIO) pins
Optional external EEPROM for startup device configurations.
L: 2-3/4" W: 1-1/16" T: 1/2" WT: .04

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.

As an example:
   ABS plastic contains styrene
   PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
   electrolytic capacitors can contain Ethylene glycol
   Brass can contain Lead
   flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
   Aluminum alloys can contain Chromium

To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!